|
The following is a partial list of rental equipment available at any Maine Oxy location.
Call the Maine Oxy location nearest you for pricing and availability. Or request a rental quote or information by clicking HERE |
| |
| Electric Power Sources CC/CV Stick/MIG |
E300 3+2 S.S.
DC400 S.S.
DC600 S.S.
|
375 amp DC, 480/575, 3 phase
400 amp DC, 230/460/575, 3 phase
600 amp DC, 230/460/575, 3 phase
|
|
| Electric Power Sources Paks (Inverters CC) |
4 Pak LS300 CC
6 Pak LS300 CC
8 Pak LS300 CC
|
300 amp DC welder each, 460/575, 1 or 3 phase
300 amp DC welder each, 460/575, 1 or 3 phase
300 amp DC welder each, 460/575, 1 or 3 phase
|
|
| Electric Power Sources Paks (Inverters CC/CV) |
4 Pak EX300
6 Pak EX300
8 Pak EX300
|
300 amp DC welder each, 460/575, 1 or 3 phase
300 amp DC welder each, 460/575, 1 or 3 phase
300 amp DC welder each, 460/575, 1 or 3 phase
|
|
| Electric Power Sources Paks-CC |
E300, 4 Pak S.S.
E300, 6 Pak S.S.
4 Pak S.S. R3R 500
Miller Mark VIII-2
|
30-375 amp DC each, 480/575, 3 phase
30-375 amp DC each, 480/575, 3 phase
75-625 amp DC each, 230/460/575, 3 phase
30-300 amp DC each, 230/460/575, 3 phase
|
|
| Electric Power Sources Paks-CC/CV |
4 Pak E300 3+2
6 Pak E300 3+2
|
30-375 amp DC each, 480/575, 3 phase
30-375 amp DC each, 480/575, 3 phase
|
|
| Gasoline Welders |
GX200, pull start
GX270 / Ranger 8 /Bobcat
|
200 amp DC welder, 4,000 watt AC auxiliary, 11hp Honda
250 amp AC/DC welder, 8,000 watt AC auxiliary
|
|
| Propane Welders |
Ranger 8 LPG
GX271 CV/CC LPG
|
225 amp AC/DC welder, 8,000 watt AC auxiliary, 16hp Onan
250 amp AC/DC welder, 10,000 watt AC auxiliary, 20hp Kohler
|
|
| Diesel Welders |
DX300
D300K 3+3
D500K 5+3
|
300 amp DC welder, 10,000 watt AC auxiliary, Kubota
300 amp DC welder, 3,000 watt AC auxiliary, Kubota
500 amp DC welder, 3,000 watt AC auxiliary, Kubota
|
|
| Inverters CC (Electric Power Source) |
130 S
LS300
V100S
|
130 amp DC welder, 115/230, 1 phase
300 amp DC welder, 460/575, 1 or 3 phase
100 amp DC welder, 115, 1 phase
|
|
| Inverters-CC/CV (Electric Power Source) |
LM300
EX300
|
300 amp DC welder, 208/230/460, 1 or 3 phase
300 amp DC welder, 208/230 or 460/575, 1 or 3 phase
|
|
| Electric Power Sources CC, Stick |
IdealArc 250 S.S.
E300
R2R 500
|
300 amp AC/DC, 230/460/575, 1 phase
300 amp DC, 460, 575, 3 phase
625 amp DC, 230/480/575, 3 phase
|
|
| Wire Feeders w/ MIG Gun |
LN-7
LN-9
LN-25
LT-7
Spoolgun (Spoolmatic 30A/WC24)
Push/Pull (XRA feeder/XR15 gun)
|
023-3/32 solid, 0.45-7/64 cored, 115 volt
023-1/16 solid, 0.45-5/64 cored, 115 volt
.023-5/64 ARC Powered
3/32-3/16 Basis Unit, 115 volt
w/ WC24 Control 030-1/16 aluminum
w/ XR15 gun 030-1/16 aluminum
|
|
| Wire Feeders w/Power Source |
SP 125 Plus
Wirematic 255
|
125 amp DC welder, 115, 1 phase
250 amp DC welder, 230/460/575, 1 phase
|
|
| TIG Power Sources (includes torch & regulator; Thumb remote w/130S & LM300; Foot remote w/Squarewave units.) |
130 S
LM300
Squarewave 255
Squarewave 355
|
130 amp DC welder, 115/230, 1 phase
300 amp DC welder, 208/230/460, 1 or 3 phase
255 amp AC/DC, 230/460/575, 1 phase
355 amp AC/DC, 230/460/575, 1 phase
|
|
| Track Cutting Equipment |
VCM 200
|
Portable cutting machine C/W Track
|
|
| Distribution Panels |
DP15
|
480 or 575v Stepdown to 120v
|
| DP25 |
480 or 575v Stepdown to 120v & 240v |
| DP225 |
230/460/575v Distribution only |
| DP225T |
460-575v Distribution & 120/240 Stepdown |
|
| Smoke Extractors |
160 CFM-SE
1050 CFM-SE
|
1602W Smoke Extractor
10502W Smoke Extractor
|
|
| Plasma Cutting Equipment* |
3/16" Hypertherm/Thermal
1/2" Hypertherm/Thermal
3/4" Hypertherm/Thermal
1" Hypertherm/Thermal
2" Thermal
Push/Pull (XRA feeder/XR15 gun)
|
120 volt, 1/60hz
208/240/480 volt, 1 or 3 phase, 60hz
208/240/480 volt, 1 or 3 phase, 60hz
240/480 volt, 3 phase, 60hz
240/480 volt, 3 phase, 60hz
w/ XR15 gun 030-1/16 aluminum
|
|
| Rental Accessories |
Cable-Standard Set
Cable Extension
Watercooler
100' H.D. Remote Control
18" Ground w/Clamp
10' Cable Whip w/ Holder
|
100 ft with ground & electrode holder
50 ft w/twist lock connectors
|
|
| |
| *All Plasma consumables are an additional charge. Consumables are billed at end of rental term or monthly, whichever comes first. Credit issued for unused parts returned. |
|
| back to top |
|
